Damage visualization and deformation measurement in glass laminates during projectile penetration

Transparent armor consists of glass-polymer laminates in most cases. The formation and propagation of damage in the different glass layers has a strong influence on the ballistic resistance of such laminates. In order to clarify the course of events during projectile penetration, an experimental technique was developed, which allows visualizing the onset and propagation of damage in each single layer of the laminate. A telecentric objective lens was used together with a microsecond video camera that allows recording 100 frames at a maximum rate of 1 MHz in a backlit photography set-up. With this technique, the damage evolution could be visualized in glass laminates consisting of four glass layers with lateral dimensions 500 mm × 500 mm. Damage evolution was recorded during penetration of 7.62 mm AP projectiles with tungsten carbide core and a total mass of 11.1 g in the impact velocity range from 800 to 880 m/s. In order to measure the deformation of single glass plates within the laminates, a piece of reflecting tape was attached to the corresponding glass plate, and photonic Doppler velocimetry (PDV) was applied. With the photonic Doppler velocimeter, an infrared laser is used to illuminate an object to be measured and the Doppler-shifted light is superimposed to a reference light beam at the detector. The simultaneous visualization and PDV measurement of the glass deformation allow determining the deformation at the time of the onset of fracture. The analysis of the experimental data was supported by numerical simulations, using the AUTODYN commercial hydro-code.     

电磁干扰预测在频率方案选择中的应用

应用电磁干扰预测的原理 ,针对一体化通信指挥系统中 ,多部电台集中使用所带来的频率管理问题 ,进行了干扰多级预测 ,得出了保证电磁兼容性系统各电台之间应满足的频率间隔 ,提出了通信网中通信频率方案     

分布式麦克风阵列的声源定位

声定位探测技术的无源被动特性,使其在定位技术研究领域内独树一帜,时延估计和定位算法是支持这一技术的核心。DUET时延估计算法简单,通过对接收到的信息分段帧移加窗处理,能够有效识别有用语音信息,时延估计精度较高,在高噪声的环境中非常适用;球面定位算法是基于时延估计提出的,对麦克风的排列形式不固定,适用于任意排布的麦克风阵列,并且在时延估计精度较高的情况下,能够很准确地对声源目标进行定位。     

基于ADF4360-X的频率合成器设计

结合锁相环的基本原理,介绍了高集成整数分频频率合成器芯片 ADF4360-X 的特性,该系列芯片集成了 VCO 非常利于设备的小型化;以 ADF4360-7为例,给出了实际应用中的设计要点、实现方法和实现电路时的注意事项。测试结果显示,设计的频率合成器覆盖范围达到400 MHz,步进1 MHz,偏离中心频率1 kHz 处相位噪声达到-93 dBc/Hz。     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

气动式振动台气锤产生激励信号的机理及其性能研究

建立了阶梯式活塞气锤的力学模型,揭示了该类气锤产生碰撞信号的机理,针对两种不同型号的气锤,结合大量工程实验仿真生成了不同气压作用下两种气锤产生的激励信号,以激励信号的低频能量为气锤的性能指标,进一步评价了两种气锤的性能优劣.研究结果表明:大气锤的性能明显优于小气锤的性能.     

基于TOA差值矩阵的雷达脉冲序列PRI识别方法

针对雷达脉冲序列的主要特点,利用TOA(脉冲到达时间)差值矩阵探索PRI(脉冲重复间隔)的识别问题.设计了一种新方法,首先由TOA序列求出TOA差值矩阵,再求出TOA差值矩阵的逆矩阵,分析TOA差值矩阵逆矩阵的特殊结构,得到PRI的识别结果.通过研究重频固定、脉冲丢失和重频参差三种情况下的PRI识别问题,说明了该方法用于雷达脉冲序列PRI识别的可行性.     

一种用模糊逻辑控制的新型三相电压型PWM整流器

介绍一种基于模糊逻辑的三相AC/DC空间矢量变流技术方法,该方法软件结构简单,便于技术实现.应用该方法研制的样机,谐波失真THD值小于3.9%.     

电子对抗系统中的频率合成器

本文以锁相环大规模集成电路为核心,提出了一种可程控的频率合成器。实践证明,它频率稳定度高,其数量级与晶振相同,频率覆盖范围大,超过了倍频程,频率切换迅速,转换时间达微秒级。     

带限信号高频重建频域极小化外推算法

通过离散Fourier变换,给出了一个频域极小化外推算法。该算法能较好地抑制噪声干扰,其计算量小,计算机仿真结果表明,该方法有良好的应用前景。